IBM Personal Computer 9308 Manuel d'utilisateur télécharger pdf (Page 79)

Note: Use clip nuts if your rack has circular holes. If your rack has square

holes, you can use the rack-insertion tool or a flat-blade screwdriver to

install cage nuts.

2. On the rail marked R, loosen the four screws 2.

3. Hold the rail against the outside of the right rack-mounting flange, and loosely

insert the two front M6 screws 1.

4. Extend the rail outside of the rear rack-mounting flange; then, install and tighten

two rear M6 screws 3.

5. Tighten the two front screws 1; then, tighten the four screws 2.

Repeat step 2 through step 5 to install the rail marked L on the left side of the

rack.

NetBAY 42 Enterprise Rack (Type 9308 Models 42P, 42X, 4SA, 4SB, 42S, 42E) 69

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 243 244

Pas de commentaire

IBM Personal Computer 9308 Manuel d'utilisateur Page 79