Ibm B50 Manuel d'utilisateur télécharger pdf (Page 173)

3. The memory modules are keyed so that they can only be inserted one way.

Align the memory module notches (1 in the following illustration) with the keys in

the memory connector.

4. Push down on the memory module until the locking tabs lock the memory

module into the connector, as shown in the following illustration. (Do not attempt

to move the locking tabs yourself. They lock automatically when you have fully

inserted the memory module.)

Attention: Inserting the memory module at an angle may cause damage.

5. Inspect each memory module, and ensure that the module is fully inserted into

the socket.

Chapter 7. Removal and Replacement Procedures 7-29

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 197 198

Pas de commentaire

Ibm B50 Manuel d'utilisateur Page 173