IBM F50 Manuel d'utilisateur Page 169

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 364
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 168
Adding or Replacing Memory to an Existing Card
1. Remove the memory adapter card, see “Removing Memory Adapter Cards” on
page 5-22
2. Locate the memory module connectors and determine which module you want to
add or remove. If you are removing memory modules, see “Removing Memory”
on page 5-28; then return here if you are replacing memory.
3. With one hand, touch any metal surface of the chassis to minimize static
electrical charges, and then pick up a memory-modules.
4. Install the memory module.
Note: Memory modules must be installed in identical pairs (size and speed).
New memory modules must be installed in the first available pair of vacant
connectors, starting at pair 1 (connectors J1 and J2) and progressing to pair 8
(connectors J15 and J16). Refer to the previous figure.
a. The memory modules are keyed so that they can only be inserted one way.
Align the memory module notches with the keys in the memory-modules
connectors.
Chapter 5. Installing Options 5-25
Vue de la page 168
1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 363 364

Commentaires sur ces manuels

Pas de commentaire