Ibm System Storage Subsystem DS5020 Manuel d'utilisateur télécharger pdf (Page 113)

the SFP modules of the host bus adapters. Figure 54 shows the location on the

RAID controllers of the DS5020 storage subsystem where the host-system

cables connect.

Note: DS5020 controllers with four Fibre Channel host ports is shown in the

following illustration. The host channel configuration in your DS5020

hardware might differ slightly from the following illustration.

3. Repeat steps 1 on page 82 and 2 on page 82 for each additional redundant

host connection. You can create two redundant host connections for the

DS5020 storage subsystem, as shown in Figure 55 on page 84, or a maximum

of four redundant host connections (not shown). With four redundant host

connections, you can have a connection to a DS5020 Fibre Channel host bus

adapter or to Fibre Channel switch ports.

Host portsController A

Host ports Controller B

Figure 54. Location of host cables on RAID controllers on the DS5020

Chapter 3. Cabling the storage subsystem 83

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 249 250

Pas de commentaire

Ibm System Storage Subsystem DS5020 Manuel d'utilisateur Page 113