Ibm T541A Manuel d'utilisateur télécharger pdf (Page 27)

3. Squeeze the sides of the hinge cover (b) and pull it off.

4. Gently lift the stand cover (c) along the top and then slide it backwards

and off the stand.

5. Remove the signal cable from the monitor and connect the new cable.

6. Slide the stand cover back on the stand.

7. Put the hinge cover back on, making sure that the straight side is at the

top.

8. Insert the three tabs at the top of the cable cover into the slots in the

back of the monitor and push the cover into place.

To obtain the correct cables and/or to get further instructions on installing

them, call the IBM HELPCENTER at the above numbers or contact your

dealer, retailer, or other IBM authorized Servicer.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Pas de commentaire

Ibm T541A Manuel d'utilisateur Page 27